g98l problems

luis.licon at cimav.edu.mx luis.licon at cimav.edu.mx
Tue Nov 26 20:55:48 EST 2002


Hi you all guys, I have a problem while running g98l on a small beowulf (4
single nodes interconnected by a fast ethernet running on Red Hat Linux
7.2)

The error occurs as follows:


/////////////////////////O U T P U T////////////////////////////////////


 ***********************************************
 Gaussian 98:  x86-Linux-G98RevA.11.1 1-Nov-2001
                   26-Nov-2002
 ***********************************************
 %NProc=4
 Will use up to    4 processors via shared memory.
 %mem=8MW
 ----------------------------
 #p opt freq=noraman rpm3 zdo
 ----------------------------
 1/14=-1,18=50,19=11,26=3,38=1/1,3;
 2/9=110,17=6,18=5,40=1/2;
 3/5=2,11=1,12=1,25=1,30=1/1;
 4/5=3,7=1,11=1,20=7,22=1,24=1,35=1/1,2;
 6/7=2,8=2,9=2,10=2/1;
 7//16;
 1/14=-1,18=50,19=11/3(1);
 99//99;
 2/9=110/2;
 3/5=2,11=1,12=1,25=1,30=1/1;
 4/5=5,7=1,11=1,16=2,20=7,22=1,24=1,35=1/1,2;
 7//16;
 1/14=-1,18=50,19=11/3(-4);
 2/9=110/2;
 6/7=2,8=2,9=2,10=2/1;
 99//99;
 Leave Link    1 at Tue Nov 26 18:46:49 2002, MaxMem=    8388608 cpu:     
 0.1
shmget failed.
shmget failed.: Invalid argument

///////////////////////////////////////////////////////////////////////////



Is there any idea of what is going on?




Thanks,


Lycon


_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list