M A Suzen
mehmet.suzen at bristol.ac.uk
Wed Nov 13 14:05:44 EST 2002
APC has solutions for that. There is a kind of switch to
share single UPS. http://www.apcc.com/resource/include/techspec_index.cfm
And it has a software and you can run as a deamon and
after power failure, nodes will automatically halt, in proper
--On 13 November 2002 12:33pm -0500 Dan Christensen <jdc at uwo.ca> wrote:
> We're in the planning stages for preparing a room to house a small
> cluster, consisting of roughly 8 to 10 dual-cpu nodes to begin with.
> We are planning to use two or three 20A 120V circuits. (Two should be
> enough, but three will give us room for future expansion.)
> We are wondering what kind of UPS to get. Is it standard to get
> one UPS per circuit, or are there affordable UPS units that will
> manage several circuits? ("Affordable" is a key word.) Most outages
> are short, so we just need between 30 and 60 minutes of battery
> backup. Also, I've heard that some UPS's can monitor the room
> temperature and shut down the machines if it gets too hot. This
> would be useful.
> So, any advice about what we should get?
> I'm also curious about monitoring the UPS's. If there are several
> of them, does one usually monitor all of them using the head node,
> or split this task up?
> Dan Christensen
> jdc at uwo.ca
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf