Tyan's new S2722GNN
becker at scyld.com
Tue Nov 12 15:27:07 EST 2002
On Tue, 12 Nov 2002, Steve Gaudet wrote:
> My concern is the management for this motherboard and if you need this
> Zircon option. I'm wondering if Tyan is using Zircon for management and not
> putting them into the BIOS.
Zircon is a product name for the most common IPMI BMC (Baseboard
Management Controller). It's a microprocess that allows network (and,
less interesting, serial line) management of the box independent of the
This seem to be the most common IPMI BMC. It's even on the zx6000
Itanium 2 systems.
> Compliance with Intelligent Platform Management Interface (IPMI) draft,
> version 1.5
Observant list readers will not that we've been talking about IPMI
recently. We will have an IPMI module on our price list after SC2002.
> 12 tachometer inputs for fan speed monitoring
Depending on the chip, you different numbers of general purpose I/O pins
that can be used for LEDs, fan tach, case-open sensors, etc.
> Three I2C master/slave ports
One goes to a 3Com or Intel NIC, the other two to memory devices etc.
> Low pin count (LPC) bus provides access to three keyboard controller style
> (KCS) and one-block transfer interfaces
The device driver can access this with KCS or MCS interfaces. Both are
brain damaged, but not quite brain dead.
> 20K-bytes of internal RAM
The key is what firmware the BMC has. Using a Zircon chip means nothing
about the protocol or capabilities. But I'm guessing that there will be
only one or two firmware series.
> Looks interesting.
How much extra?
Donald Becker becker at scyld.com
Scyld Computing Corporation http://www.scyld.com
410 Severn Ave. Suite 210 Scyld Beowulf cluster system
Annapolis MD 21403 410-990-9993
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf