Tyan 2466-M Wake On Lan

Dave Johnson ddj at cascv.brown.edu
Fri Nov 1 17:31:38 EST 2002


I have not had any luck getting ether-wake to do anything with the S2466-M
(1Meg bios) onboard 3c920 chips, and similarly with the S2462.  Adding
enable_wol to the module options does keep the interface powered up after
shutdown -h (which it didn't do before), but nothing came of blasting 
magic packets at the IF's MAC address.  RH 7.3 2.4.18-10 stock 3c59x driver.

	-- ddj

On Thu, Oct 31, 2002 at 08:10:02PM -0500, Donald Becker wrote:
> On Thu, 31 Oct 2002, Thomas Clausen wrote:
> 
> > I'm trying to figure out how to enable WOL on Tyan 2466-M, bios ver 4.01.
> > 
> > There is no bios option (only wake on modem). Previous discussions seem to
> > suggest that a DOS utility from 3com is necessary.
> 
> That motherboard should come with WOL enabled.
> 
> For older 3Com cards there was no way to do WOL without first loading
> a WOL-enabling driver and doing a warm shut-down.
> 
> -- 
> Donald Becker				becker at scyld.com
> Scyld Computing Corporation		http://www.scyld.com
> 410 Severn Ave. Suite 210		Scyld Beowulf cluster system
> Annapolis MD 21403			410-990-9993
> 
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list