DUAL CPU board vs 2 Single CPU boards: bang for buck?

Josip Loncaric josip at icase.edu
Thu Mar 7 14:21:50 EST 2002


"Robert G. Brown" wrote:
> 
>   Your Mileage May Vary

Exactly.  The cost of duals is about 15% lower per CPU, but some codes
(e.g. CFD) perform about 25% worse on duals due to memory contention. 
If you do CFD, price/performance can favor singles by about 10%; if you
do something less memory intensive, duals win by about 15%.  Other
factors (such as space efficiency, power/AC requirements,
simplicity/reliability, personal preferences) are often more significant
than these 10-15% differences in node price/performance.

One exception: If you use a high end network (e.g. Myrinet, which can
almost double the cost of a node) this clearly favors duals which need
only half as many expensive network connections.

Sincerely,
Josip

-- 
Dr. Josip Loncaric, Research Fellow               mailto:josip at icase.edu
ICASE, Mail Stop 132C           PGP key at http://www.icase.edu./~josip/
NASA Langley Research Center             mailto:j.loncaric at larc.nasa.gov
Hampton, VA 23681-2199, USA    Tel. +1 757 864-2192  Fax +1 757 864-6134
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list