becker at scyld.com
Sun Jan 27 15:36:50 EST 2002
On Sun, 27 Jan 2002, David McBride wrote:
> I am trying to be able to do two different things.
> 1) I am trying to perform is to channel bond with a linux router that has 3
> nics, 2 connected to two different cable modems and one for the lan side to
> provide internet access.
Bonding won't work without the ISP side being specifically configured
for it. Think of incoming packets -- they will only go to one
IP address at the ISP, and thus only arrive on one cable modem.
You might be able to transmit over both interfaces, but even there you
will run into problems. Most cable systems are very agressive about
looking for mismatched source IP addresses.
Donald Becker becker at scyld.com
Scyld Computing Corporation http://www.scyld.com
410 Severn Ave. Suite 210 Second Generation Beowulf Clusters
Annapolis MD 21403 410-990-9993
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf