Dual Athlon MP 1U units

Velocet math at velocet.ca
Sat Jan 26 02:06:10 EST 2002


On Fri, Jan 25, 2002 at 02:18:06PM -0500, Chris Black's all...
> We run dual 1.2GHz amd athlon mp cpu nodes with the Tyan S2462 Thunder
> K7 motherboards under 2.4 kernels. At the time we got our nodes, this
> was the only dual athlon board out for any length of time, so we ended
> up getting it even though it has onboard scsi that we don't use. There
> is a model out now without the scsi but the same chipset. Only issues
> is that we needed good power supplies with these boards (460 or 435,
> not sure). aapro (or some company with a similar name) makes 1U dual
> athlons, but we decided against it because we were worried about
> cooling issues. We actually rackmount our 2U nodes with some space between 
> them for some extra airflow above and below the cases.

Whats the power dissipation of running dual 1.2 GHz Mp's? How about for
1.33Ghz regular athlons in non-SMP configs as comparison? (As well, how much
heat comes off typical power supplies to run these systems?)

How many CFM of airflow are needed for typical configs of each to ensure
cooling?

/kc

> 
> Chris Black
> 
> On Fri, Jan 25, 2002 at 11:54:37AM -0600, Steven Timm wrote:
> > 
> > I am just wondering how many people have managed to get a
> > cluster of dual Athlon-MP nodes up and running.  If so,
> > which motherboards and chipsets are you using, and has anyone
> > safely done this in a 1U form factor?
> > 
> > Thanks
> > 
> > Steve Timm
> 



-- 
Ken Chase, math at velocet.ca  *  Velocet Communications Inc.  *  Toronto, CANADA 
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list