external raid arrays

Tim Carlson tim.carlson at pnl.gov
Thu Feb 21 18:07:06 EST 2002


On Thu, 21 Feb 2002, Velocet wrote:

> We get 54Mb/s read and 44Mb/s write with raid 0+1 on 10Krpm IBM LVD 160
> drives with 1 controller. I would expect, with suitably fast CPUs (ours
> is a Tbird 900) and 66/64 pci slots with some nice Tekram (we swear by
> these) or Adaptec controllers that 4 of them with 12 10Krpm drives would
> probably easily net you over 100MB/s read and write.

Here are bonnie numbers on a Dell 530 Dual 1.7Ghz box with an Adaptec
39160 card using both channels to a Dell PowerVault array filled with 8
36Gig U160 drives. This is a flat raid 0. Basically, it is fast as hell
:). You can't get this fast with hardware raid under Linux. For hardware
raid, the Dell Perc3 cards (Megaraid based) give poor performace. The
Adaptec 3210S outperforms the Perc3 by a fair amount, but software raid
beats them all hands down.

Version 1.01d       ------Sequential Output------ --Sequential Input-
--Random-
                    -Per Chr- --Block-- -Rewrite- -Per Chr- --Block--
--Seeks--
Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP  /sec %CP
              6240M 19900  99 214098  68 88136  38 19648  97 229752  51 372.4
                    ------Sequential Create------ --------Random Create--------
                    -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
              files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP
                 16  2745 100 +++++ +++ +++++ +++  2817 100 +++++ +++  5922  99


Tim Carlson
Voice: (509) 376 3423
Email: Tim.Carlson at pnl.gov
EMSL UNIX System Support

_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list