Intel 82546EB dual port gigabit and AutoNeg

Joshua Baker-LePain jlb17 at duke.edu
Wed Aug 28 06:35:27 EDT 2002


On Wed, 28 Aug 2002 at 12:26pm, Peter Kjellström wrote

> I see the same thing here. I have a intel 1000XT adapter connected to a
> HP2324 with gigabit module.
> 
> lspci says:
> 
> Ethernet controller:
> Intel Corp. 82544EI Gigabit Ethernet Controller (rev 02)
> Subsystem: Intel Corp. PRO/1000 XT Server Adapter
> 
> ethtool -i DEV says:
> driver: e1000
> version: 4.1.7
> 
> Forcing it to 1000Mbit/s using ethtool seems to work though.

Actually, my head node is attached to the other gigabit module in the same 
switch, and does 1000Mbps just fine.  It has the PCI card you have above 
(running driver 4.3.2), and is using an identical cable.  It's the onboard 
dual port controller in the other server I'm having issues with.

I'll give ethtool a shot (and try a new cable, of course) -- thanks.

-- 
Joshua Baker-LePain
Department of Biomedical Engineering
Duke University

_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list