howto increase MTU size on 100Mbps FE

Bogdan Costescu bogdan.costescu at iwr.uni-heidelberg.de
Fri Apr 26 17:08:32 EDT 2002


On Fri, 26 Apr 2002, Joseph Mack wrote:

> I know that jumbo frames increase throughput rate on GigE and was
> wondering if a similar thing is possible with regular FE.

I was just about to ask the same thing... but to be more precise I was 
looking for first-hand experience with MPI/PVM over oversized Ethernet 
frames. As you say, the current situation doesn't really encourages 
experiments with Fast Ethernet, but I was thinking especially to people 
using Gigabit Ethernet.

> I couldn't increase the MTU above 1500 with ifconfig or ip link.

There are also limitations in the drivers. The upper network layers will 
refuse to set a value that is not supported by the driver.

> VLAN sends a packet larger than the standard MTU, having an
> extra 4 bytes of out of band data. The VLAN people have 
> problems with larger MTUs. 

I think that most of the problems come from the fact that most cards do 
not have support for VLAN - allow the extra 4 bytes _only_ if the VLAN tag 
is present. Most of the cards allow oversized frames but there is no 
control over size and/or VLAN tag presence.

> which indicate that the MTU is set in the NIC driver and
> that in some cases the MTU=1500 is coded into the hardware
> or is at least hard to change.

There are actually some hardware limitations: cards have FIFO buffers 
which are designed based on normal Ethernet frame size; while VLAN's 4 
extra bytes usually fit, a 4-8 KiByte packet usually doesn't. Some drivers 
also take active measures to prevent Tx underruns which are probably 
disturbed by oversized frames.

> I don't know whether regular commodity switches (eg Netgear
> FS series) care about packet size, but I was going to 
> try to send packets over a cross-over cable initially. 

That's another question. Store-and-forward switches probably need to store 
the whole packet before transmitting it further...

<shameless plug>
A week ago, I released a patch to add large MTU/VLAN support to the 3c59x 
driver in 2.4.18. So far I haven't receive any feedback about it... It 
still needs some work, but I first wanted to test functional support.
http://www.iwr.uni-heidelberg.de/groups/biocomp/bogdan/tornado/index.html
</shameless plug>

-- 
Bogdan Costescu

IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen
Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY
Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868
E-mail: Bogdan.Costescu at IWR.Uni-Heidelberg.De

_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list