Ethernet Channel Bonding (ECB)
cpignol at seismiccity.com
Tue Apr 23 18:32:00 EDT 2002
Have you generalized channel bonding to all the nodes of your cluster?
Which switch do you use?
Martin Siegert wrote:
>On Mon, Apr 22, 2002 at 06:01:22PM -0600, Timothy W. Moore wrote:
>>I am new to the Beowulf cluster computing and am awaiting UPS to deliver
>>my systems. I have been researching ECB and it seems to have mixed
>>reviews regarding performance enhancement. Would/Could someone shed
>>some light on this topic to the following effect:
>> Is it truly necessary?
>That depends on the programs you are planning to run your cluster. With
>respect to performance: I am getting 269Mbit/s bandwith with 3-way
>channel bonded fast ethernet (using 3Com NICs). This is almost exactly
>three times as much as I get from a single NIC. The latency is not quite
>as good as with a single NIC: 55us vs. 43us (all numbers measured with
>netpipe). Thus if your program doesn't need the bandwith or if your
>program is extremely sensitive to latencies then you don't need channel
>> If using RedHat 7.2, should I re-compile the kernel?
>Not necessarily. The bonding.o module is part of all RedHat kernels.
>However, I strongly recommend upgrading the kernel to 2.4.18 - I had
>problems with all earlier 2.4.x versions.
>Academic Computing Services phone: (604) 291-4691
>Simon Fraser University fax: (604) 291-4242
>Burnaby, British Columbia email: siegert at sfu.ca
>Canada V5A 1S6
>Beowulf mailing list, Beowulf at beowulf.org
>To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
Claude Pignol SeismicCity, Inc. <http://www.seismiccity.com>
2900 Wilcrest Dr. Suite 470 Houston TX 77042
Phone:832 251 1471 Mob:281 703 2933 Fax:832 251 0586
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf