scyld slave node problems

Donald Becker becker at
Thu Apr 11 16:03:31 EDT 2002

On Thu, 11 Apr 2002, Stepan Kruglikov wrote:

> I solved this problem by increasing memory on each node to 64MB. You can
> also get the node up and running with 64MB, setup node partitions, and then
> delete ram drive and run with 32mB. Although it works, I recommend doing it
> only in case if you are interested in proof of concept cluster.

It's possible to trim the cached library list in /etc/beowulf/config and
fit into 32MB.  But only the most trivial application will run with 32MB
and no local disk.

Donald Becker				becker at
Scyld Computing Corporation
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993

Beowulf mailing list, Beowulf at
To change your subscription (digest mode or unsubscribe) visit

More information about the Beowulf mailing list