network drivers - using 3c509 and 3c515 in the same system ?
per at computer.org
Sun Nov 25 10:48:27 EST 2001
I've been working on upgrading the master node in our cluster this weekend,
and hit an issue with using a 3C509 and a 3C515 card in the same system.
When the 3C515 module is loaded first, loading the 3C509 module will
lock the system hard. Same goes if the card is a 3C509B (PnP-capable).
If instead the 3C509 module is loaded first, the 3C515 driver cannot find
the 3C515 card, and refuses to load.
I looked at using the newer 3C515.c from the Scyld page, but realised
that it only works with 2.2, not 2.4 - and the masternode is 2.4.14.
I ended up using 2 x 3C515, but would like to know if anyone else has
noticed this behaviour with a combination of 3C509 and 3C515 ?
Per Jessen, Zurich
http://www.enidan.com - home of the J1 serial console.
Windows 2001: "I'm sorry Dave ... I'm afraid I can't do that."
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf