Tyan Tunder K7 and Gigabit Ethernet cards
SGaudet at turbotekcomputer.com
Thu Nov 15 15:38:35 EST 2001
> I would like to know if people have been successful in using gigabit
> ethernet(over copper) cards with the Tyan Thunder K7
> motherboard. (s2462)
> This has two built-in 3com 100 Base T cards.
> I have tried to use a DLINK DGE-550T card with the latter but
> without much
> success. Even after disabling the onboard NICs, the card did not work
> properly. The problem is that an interrupt is not set after a DMA
> transmitt (something to do with the APIC I presume). I tried
> linux kernel
> 2.4.12-ac3 with the latest driver from Dlinks website, but
> that did not
> make much difference either. I have six of these.
> The cards that I am particularly interested to hear about are the
> 3com Gigabit Network card (3c996-T) or (3c996B-T) or (3c1000-T)
> Intel PRO/1000 Gigabit Server 1000B-T PCI Adapter (PWLA8490T)
> NETGEAR 100/1000Base-T Copper Gigabit Ethernet Adapter (GA-623T)
> Netgear 100/1000BASET 32/64 BIT PCI Gigabit Adapter (GA-622T)
> SMC TigerCard 1000BaseTX 32/64Bit PCI Gb Ethernet Nic (SMC9462TX)
> Or any other cheap gigabit network cards.
Ever look at Syskonnect?
Had very good luck with them, and they are based in Europe.
Linux Sales Engineer
| Turbotek Computer Corp. tel:603-666-3062 ext. 21
| 8025 South Willow St. fax:603-666-4519
| Manchester, NH 03103 e-mail:sgaudet at turbotekcomputer.com
| toll free:800-573-5393 web: http://www.turbotekcomputer.com
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf