Use of hubs not switches

Keith Underwood keithu at parl.clemson.edu
Thu Jun 28 10:51:45 EDT 2001


Of course, some 8 port switches are $100.  Some 16 port switches are $160.
Three 16 ports switches aren't that expensive, but I would at least get an
8 port switch to connect together some of those hubs.  Look at the KLAT2
Flat Neighborhood Network stuff (http://aggregate.org/KLAT2) for info on
how to best utilize your limited network equipment.

				Keith

On Thu, 28 Jun 2001, Raymond, James (SCO) wrote:

> I am looking to put together a Beowulf cluster.  I have roughly 40
> workstations of reasonable spec, enough network cards, network cables and
> adequate power.  I do not have any switches but do have enough hubs to run
> the proposed network.  Does anyone know if hubs are adequate enough to run a
> Beowulf cluster??  I hope so as cash for switches is pretty limited at the
> moment.  Hope to hear from someone soon.
> Thanks
>
> James.
>
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
>

---------------------------------------------------------------------------
Keith Underwood                   Parallel Architecture Research Lab (PARL)
keithu at parl.clemson.edu                                  Clemson University


_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list