Channel bonding performance problem UPDATED

Martin Siegert siegert at sfu.ca
Thu Jul 19 13:37:55 EDT 2001


On Thu, Jul 19, 2001 at 11:09:45AM -0500, Hao He wrote:
> BTW, I am using two sperate D-Link DSS-8+ 10/100Mb Switch in my bonding test.

Have you tested channel bonding between two nodes connected through
cross-over cables first? I suggest to make sure that that works and then
throw in the switches.

I am using 3c905B cards without any problems for channel bonding.
On my machines (RH6.2, 2.2.19 and RH7.1, 2.4.5) this works basically
out of the box, i.e., after setting up ifcfg-bond0, ifcfg-eth0, ifcfg-eth1,
etc.

Martin

========================================================================
Martin Siegert
Academic Computing Services                        phone: (604) 291-4691
Simon Fraser University                            fax:   (604) 291-4242
Burnaby, British Columbia                          email: siegert at sfu.ca
Canada  V5A 1S6
========================================================================

_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list