jeffrey.b.layton at lmco.com
Mon Dec 3 15:13:26 EST 2001
Since the most likely dual Athlon board already has
dual 100Mbit NICs onboard, why not get a low cost
100Mbit switch? (e.g. HP Procurve). It will have a decent
backplane bandwidth (possibly better than a hierarchical
network). I think the price will be as good or better (just
a guess though).
Steven Berukoff wrote:
> Hello all,
> My group is currently outlining the plans for a ~140 node dual athlon
> cluster. Our networking needs are minimal: no internode communication,
> rare master-slave communication (with xfers of ~tens KB), and even more
> rare very large data transfers from slave to server (~100s of MB).
> Now, we are currently considering a hierarchical network structure, to
> minimize costs. In particular, we planned on having each set of ~15 nodes
> connected to a 16 port 100Mbit switch with a Gbit uplink. Then, each Gbit
> line gets plugged into a Gbit switch.
> The question I have to you, my dear reader, is: Do there exist 16 or 24
> port Gbit switches suited for this purpose? The only ones I know of are
> made by Foundry Networks, who manufacture 16, 24, and 32 port
> models. Have I missed some? If so, does anyone have yea/nay
> Your comments and suggestions are, as always, very appreciated.
> Steve Berukoff tel: 49-331-5677233
> Albert-Einstein-Institute fax: 49-331-5677298
> Am Muehlenberg 1, D14477 Golm, Germany email:steveb at aei.mpg.de
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf