another problem! MPICH

Eric Linenberg elinenbe at umich.edu
Fri Aug 3 20:04:01 EDT 2001


okay an update here:

I can rsh into a machine without using a password,
eg rsh snickers, but if I do a "rsh snickers date", then I get a permission 
denied error.

the thing is I when I built mpich i did ./configure -rsh=ssh so this should 
not be an issue.   But if it is how is one to fix it?  On the other hand if I 
do a "ssh snickers date" this works perfectly.

thanks again,
eric

On Friday 03 August 2001 07:58 pm, Eric Linenberg wrote:
> I am running MPICH and all the example program work fine and all the tes
> program work A-OK, but when I try and run LS-DYNA (why I am building this
> cluster) I get errors like this:
>
> [root at kitkat lstc]# ./mpirun -np 4  mpp960
> Permission denied.
>
> and then I kill it, and I get this:
>
> p0_22073:  p4_error: interrupt SIGINT: 2
> bm_list_22074:  p4_error: interrupt SIGINT: 2
> ./mpirun: line 1: 22073 Broken pipe             /usr/local/lstc/mpp960
> -p4pg /usr/local/lstc/PI21941 -p4wd /usr/local/lstc
> [root at kitkat lstc]#
>
> when I run it with -v I get this:
>
> [root at kitkat lstc]# ./mpirun -v -np 4  mpp960
> running /usr/local/lstc/mpp960 on 4 LINUX ch_p4 processors
> Created /usr/local/lstc/PI22080
> Permission denied.
>
> and it looks the same when I kill it.
>
> Remember all the exampl program cruise!  Thanks for the help (again)
>
> -eric

_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list