problems compiling SCALAPACK

Yoon Jae Ho yoon at bh.kyungpook.ac.kr
Wed Sep 6 05:46:45 EDT 2000


I forgot to say more.
If you delete the files --   SBLAT2.SUMM, DBLAT2.SUMM, CBLAT2.SUMM, ZBLAT2.SUMM  before compilation again(in the second), 
you can have no error below during compilation.

Have a nice day 

from Yoon Jae Ho
Seoul, Korea
http://ie.korea.ac.kr/~supercom/

----- Original Message ----- 
From: Yoon Jae Ho <yoon at bh.kyungpook.ac.kr>
To: <william.s.yu at ieee.org>
Cc: <beowulf at beowulf.org>
Sent: Wednesday, September 06, 2000 6:34 PM
Subject: Re: problems compiling SCALAPACK 


> Using blas from blas_lapack.tar.gz (ie.korea.ac.kr/~supercom/software), I can compile LAPACK without error below in the first time.
> 
> but I don't test using ATLAS below.
> 
> My PC is 150Mhz Pentium .. too long to compile the LAPACK using redhat 6.2 version
> 
> If you make compilation more than 2 times, in the first time you can compile without error. 
> 
> but in the second time, then you got the error below.
> 
> from Yoon Jae Ho
> Seoul, Korea
> http://ie.korea.ac.kr/~supercom/
> 
> ----- Original Message ----- 
> From: Horatio B. Bogbindero <wyy at cersa.admu.edu.ph>
> To: <beowulf at beowulf.org>
> Sent: Tuesday, September 05, 2000 3:20 PM
> Subject: problems compiling SCALAPACK 
> 
> 
> > 
> > i am having problems compiling SCALAPACK. i compiled first ATLAS optimized
> > BLAS for the system and named it libatlas.a then pointed LAPACK to use
> > this BLAS libraries. then i did a make in the LAPACK directory.
> > 
> > i got the following error at the end part of the file:
> > 
> > make[1]: Leaving directory `/home/apps/libs/LAPACK/BLAS/TESTING'
> > ( cd BLAS; ./xblat2s < sblat2.in ; \
> >            ./xblat2d < dblat2.in ; \
> >            ./xblat2c < cblat2.in ; \
> >            ./xblat2z < zblat2.in )
> > open: 'new' file exists
> > apparent state: unit 6 named SBLAT2.SUMM
> > last format: list io
> > lately reading direct formatted external IO
> > open: 'new' file exists
> > apparent state: unit 6 named DBLAT2.SUMM
> > last format: list io
> > lately reading direct formatted external IO
> > open: 'new' file exists
> > apparent state: unit 6 named CBLAT2.SUMM
> > last format: list io
> > lately reading direct formatted external IO
> > open: 'new' file exists
> > apparent state: unit 6 named ZBLAT2.SUMM
> > last format: list io
> > lately reading direct formatted external IO
> > make: *** [blas_testing] Error 134
> > 
> > the system is a amd k7 athlon 600mhz running redhat linux 6.2.
> > 
> > thanks in advance.
> > 
> >  
> > ---------------------
> > william.s.yu at ieee.org
> >  
> > I refuse to consign the whole male sex to the nursery.  I insist on
> > believing that some men are my equals.
> > -- Brigid Brophy
> >  
> > 
> > 
> > 
> > _______________________________________________
> > Beowulf mailing list
> > Beowulf at beowulf.org
> > http://www.beowulf.org/mailman/listinfo/beowulf
> 

_______________________________________________
Beowulf mailing list
Beowulf at beowulf.org
http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list