question about Bonding tools

liuxg beowulf at eyou.com
Fri Oct 20 08:03:54 EDT 2000


beowulfFlorent Calvayrac£¬,

>Hi
>
>did you split your switch in two VLANS 
>or use two switches ?
Yes, I had divided it.I'm reading mail of Laurent Ittiand doc in 
http://www.scyld.com/network/rtl8139.html
thanks for your help
>
>See our page at http://weblotus.univ-lemans.fr/w3lotus/index.html
>
>Our Fast Ethernet CISCO Catalyst 4000 switch  for channel bonding : 
>the switch is split in two VLANs, each for a 48 port bank, and the FE
>cables go from 
>each card to each bank of the switch. Fast Etherchannel is set to
>"desirable". 
>  
>
>-- 
>Florent Calvayrac                          | Tel : 02 43 83 26 26
>(NOUVEAU!)
>Laboratoire de Physique de l'Etat Condense | Fax : 02 43 83 35 18
>UPRESA-CNRS 6087         | http://www.univ-lemans.fr/~fcalvay 
>Universite du Maine-Faculte des Sciences   |
>72085 Le Mans Cedex 9

                   

            liuxg
            beowulf at eyou.com


_______________________________________________
Beowulf mailing list
Beowulf at beowulf.org
http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list